Roof Drain Technical Information - Zurn
roof Drain Technical Information. Introduction/Selection. Product Compliance/Application. Sizing Data. Connection Types. General Product Information. Options and Variations/Common Roof Drain Accessories. Top-Set Drain Deck Plate and Deck Riser Installation Instructions. Typical Installations. Z101 High Capacity 20" Diameter Main Roof Drain
Zurn makes it easy to size roof drains. The four things you will need to know are: 1) rate of precipitation; 2) total area of roof; 3) size of leader required; and 4) area handled by each drain.
INVERTED ROOF CONCRETE DECK Z100-C-R-XJ-85 Drain installed in an insulated concrete deck. Drain is illustrated with underdeck clamp (-C), roof sump receiver (-R), vertical expansion joint (-XJ), and Zurn ballast guard extension (-85). The (-XJ) option is also available in 8" and 12" diameter drains. (See Z121 and Z125.) ROOF DRAINS
1. Place flat gasket onto flange of drain body. The flat gasket has four positioning holes which must be lined up with the four drilled and tapped holes in drain body. The gasket should smoothley lay flat on the flange of the drain body. 2. Place the clamp ring on top of the gasket by aligning the bolt holes in the clamp ring with the
How To Install A Roof Drain | Step by Step Procedure By All Tech ...
The "HOW TO INSTALL A ROOF DRAIN" video will walk you, step by step, through the process of installing a 15" cast iron roof drain, in this case a Zurn Z100 ...
How to install the Zurn Z165 roof drain - YouTube
2023年8月15日 · Simple step by step how to prepare and install Z165 roof drain
Roof Drain Installation | Using Zurn Z100 Roof Drain and LSP …
2019年3月9日 · This roof drain installation video will show you how to sump your Zurn roof drains FAST and EASY, PLUS get these benefits using this superior grade roof dra...
- [PDF]
Z100-DP-EA - Zurn
1. Create a square opening in roof (Q-deck) to receive drain assembly (opening size is 18” x 18”). 2. Fasten drain body to deck plate by aligning the (4) bosses on body and (4) slots on plate using bolts provided. 3. Put body/plate assembly onto the precut opening in the roof, aligning deck plate attachment slots in the appropriate position. 4.
1. Create a square opening in roof (Q-deck) to recieve drain assembly . Opening sizes are: Z100 18" x 18" 2. Fasten drain body to deck plate by aligning the four (4) bosses on body and four (4) slots on plate using bolts provided. 3. Put body/plate assembly onto the precut opening in the roof, aligning deck plate attachment slots in
Main Roof Drain - Z100 - 15" Diameter - Zurn
Zurn offers a full line of replacement domes for the Z100 roof drain. The dome is offered in plastic (P100-POLYDOME-USA), cast iron (P100-DOME-CI), bronze (P100-DOME-BRZ), and aluminum (P100-DOME-ALUM).