plumbing mistake "I used rosin core solder" - Plbg.com
plumbing mistake "I used rosin core solder" Author: phizox (WI) I sweat a 1/2" copper water pipe with rosin core solder by mistake. It is holding pressure just fine, but I am worried about the …
Soldering Ni-cads Together | RadioReference.com Forums
2006年10月5日 · It is unlikely you will ever be able to form a good, reliable, solder connection to the battery shell of a NiCd battery. The material of the case is incompatible with Sn/Pb solder, …
Difference between solder
Plumbing solder does not have a core, at least what I use for domestic water, drain and vent or heating work doesn't. The lead/tin content in 60/40 or 50/50 solder is the same as in electrical …
I have a roll of acid core solder, any good - Plbg.com
Re: I have a roll of acid core solder, any good ? Author: hj (AZ) Acid core is NEVER used for electical connections. They REQUIRE "rosin core", otherwise they will corrode and lose …
SMA - soldering to coax with stranded center
2024年10月3日 · I solder mine using a fine tipped hot iron and thin (.06mm) rosin core 60/40 solder. (The 60% tin content allows the solder to melt at lower temps than 50/50 solder. All the …
Soldering copper pipe - plbg.com
No matter what someone told you, flux-cored solder will not work on copper fittings. I like a flux which has powdered tin/antimony actually mixed in. Oatey and Rectorseal make this. Lead …
Male N Connector Center Pin: Do You Solder, Crimp, Or Both?
2021年2月17日 · Normally yes, most decent solder doesn't need any additional flux. But my experience working with SMD, a bit of flux really works wonders. With connectors, the solder …
Flux with Tin or Not? - Plbg.com
It is a bit more positive than regular flux, but more expensive. It probably does not make a better joint than a properly prepared one using regular flux. But many years ago, I was on a job out in …
Stranded vs. solid core? - RadioReference.com Forums
2018年2月5日 · I can see someone using copper clad steel core in RG-6 if they were planning to do long horizontal runs in the trees, etc. and wanted the extra strength so the cable didn't …
teflon tape on a solder joint - Plbg.com
Re: teflon tape on a solder joint; Author: steved1264 (MD) thanks...i can do that on some of the joints but this is kind of an elaborate system and some of the connections will have screw in …