KlassikDrain is a general purpose trench drain system available in 4″ (100 mm) – K100, 8″ (200 mm) – K200 and 12″ (300 mm) – K300 internal width with either galvanized or stainless steel edge rail.
The only standard written specifically for trench drains, and internationally recognized, is EN 1433: 2002 Drainage channels for vehicular and pedestrian areas.
ACO SPORT System 4000 channel and to allow a minimum of 4 inches (100mm) concrete encasement (recommended 4,000psi) on 3 sides to provide necessary support. Top of channel must be evenly aligned to surface of surrounding slab. See installation section for haunch details for different loadings & pavement materials.
See separate ACO Spec Info grate sheets for details. After removal of grates and ‘QuickLok’ bar there shall be uninterrupted access to the trench to aid maintenance. Installation The trench drain system shall be installed in accordance with the manufacturer’s installation instructions and recommendations. ACO Polymer Products, Inc.
The dimensions of the ACO Hygienic Trench Drain can be easily specified to meet exact project requirements. To specify a drain, please use the Specification template (see page 74) which will help you to identify the information you need, or contact our Sales/Technical department. ACO Trench Drains with fixed dimensions are also available.
Commercial Trench Drains These illustrations are a guide for typical ground conditions only. Engineering advice should be taken. Refer to for further information. An installed ACO Drain System should incorporate the following: • Correct grate type. • Correct channel type and size. • Minimum grade 4,000 psi compressive strength cement